 |
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
Opener Parts - Common parts for Liftmaster, Chamberlain, and Genie: |
| Note: Use the Blue Menu Bar above to find opener parts for specific models. | |||
| Picture | Part Number |
Description |
Price |
 |
41C4220A |
Liftmaster / Chamberlain Gear & Sprocket Assembly 41C4220A. This kit includes all of the 41A2817 parts, and is easier to install because you do not have to disassemble the output shaft assembly - the spur gear is already mounted on the new output shaft. The 41C4220A assembly also includes the worm gear, and a new bushing under the sprocket which is another common wear item. Fits chain drive openers manufactured since 1984 by: Liftmaster, Chamberlain, Sears Craftsman, Master Mechanic, and some units from Wayne Dalton. Replaces part 41A2827. Gears are not available for openers manufactured prior to 1984. We sell lots of these - they are always in stock for fast shipment ! Click Here for more information |
41C4220A $29.95 Ea. |
 |
41A2817 |
Liftmaster / Chamberlain Gear Kit 41A2817. Large Gear is 2 3/4" x 1/2" wide, with a 1/2" bore. The worm gear is 1 1/8" OD, and the teeth are 1 1/4" wide (all sizes are approximate). The kit comes with grease, bushing, pins, washers, and retaining rings / clips. We sell lots of these - they are always in stock for fast shipment ! Click Here for more information |
41A2817 $18.99 Ea. |
 |
41A4373A | Liftmaster / Chamberlain 41A4373A Safety Sensor Kit. Comes with a
pair of sensors (sender and receiver) with approximately 36" Leads, and
weather resistant splice connectors. We sell lots of these - they are always in stock for fast shipment ! |
41A4373A $22.95 |
 |
41A5034 | Liftmaster / Chamberlain 41A5034 Snappy Sensors. Comes
with a pair of sensors (sender and receiver) with approximately 36" Leads,
2 wing nuts, 2 small attachment carriage bolts, and weather resistant
splice connectors. We sell lots of these - they are always in stock for fast shipment ! |
41A5034 $22.95 |
 |
990LM | Liftmaster 990LM Surge Protector. Protects any garage door opener from harmful power surges. Door opener circuit boards and other components are frequently damaged by power surges caused by lightening storms. This surge protector has special terminals (colored connectors on bottom - see photo) that connect to, and protect, the Safety Sensors and the wall control station (only used with Liftmaster or Chamberlain openers manufactured after 1994). Click here for 990LM manual |
990LM $21.00 Ea. |
 |
QTB | Quick Turn Brackets - these reduce the headroom requirement for the garage door. Note: when you add these you will also need 2 additional rollers, | $19.95 Pr |
 |
OMB | Opener Mounting Bracket. This bracket attaches to
the top and bottom of the section to help strengthen the door and
"spread out the load". Attach the bottom of this bracket
to the mounting bolts for the lower hinge, so the opener also pulls on
the lower sections.
(White Bracket that the opener arm is attached to)
|
$12.00 Ea. |
 |
KS | Key switch for garage door openers. This key switch has a pair of normally open contacts that can be wired directly (in parallel) to the push button circuit to activate any standard garage door opener. | $9.75 Ea. |
 |
KR | Emergency Key Release for garage door openers. This is used where the garage door is the only entry point for the garage. In the event of a power failure there is no way to open the garage door, and you do not have access to pull the emergency rope release on the opener. This Emergency Key Release is mounted in the face of the top section of the garage door (you will have to drill a hole in the door). The key will unlock the device so it pulls out of the door with a cable that is attached to the opener release lever - thus releasing the opener so you can open the garage door !!! | $9.50 Ea. |
 |
OT-GE-01 | Genie Opener Trolley for Screw Drive Opener. | |
 |
OT-GE-02 | Genie Opener Trolley for Chain Drive Opener. |
|
 |
PC-35048R | Genie 35048R Photo Cell Kit - with brackets and wire | $37.00 kit |
|
Same as above without hardware |
PC-20374T | Genie 20374T Photo Cell Modules (no other hardware) | $22.00 Set |
© 2004 – 2008 Ontario Supply, Inc. All Rights Reserved. Liftmaster, Chamberlain, Genie, and Stanley are trademarks of the respective manufacturers.
